Choose a physically identifiable location and agree on the moment its stock balance will be compared with the shelf. Either pause movements at that location while the count is taken or record each movement across the boundary. A count of the right product at the wrong moment can make a perfectly accurate balance look wrong.
Mark the boundary on the warehouse floor
Start with a shelf that a second person can identify from the location label alone. Decide whether a carton resting on the floor beside it belongs to receiving, the shelf or a picking trolley. Odoo's inventory documentation describes cycle counts organised by storage location and allows different locations to have different counting frequencies. For a first trial, choose a location where the team can explain both the physical boundary and the posting process. A busy dispatch area may deserve frequent checks later but makes a difficult training example.
Put a clock beside the stock figure
Consider a shelf showing twelve pumps in the system at ten o'clock. A picker removes two at five minutes past ten and a counter finds ten at ten minutes past. Ask when the picking movement was posted. If the comparison uses the ten o'clock figure, the two removals explain the apparent difference. If the comparison already includes the posted movement, subtracting them again creates a fresh error. Keep the snapshot time, count time and movement reference together until the supervisor has signed off.
Investigate the difference before applying it
Have another person count the shelf independently when the difference persists. Check the adjacent shelf, the receiving area and the trolley holding unconfirmed picks. Record the unit used by each person and whether opened cartons were counted individually. If the missing pump is on a nearby shelf, identify which movement should have been recorded and follow the warehouse's correction process. Simply increasing one shelf and decreasing another can conceal a recurring problem with the way staff confirm transfers.
Decide what the next shift needs
Hand over the location, observed quantity, expected quantity at the agreed moment, explanation and reviewer. Separate counts awaiting a recount from approved adjustments. Before expanding the programme, ask a supervisor on the next shift to reconstruct the pump example using those entries alone. If they have to call the counter to learn when the trolley left, add a movement-time field to the sheet and repeat the trial.
Sources and further reading
Prepared with AI assistance and checked against the sources listed above. Planning examples are illustrative; your project scope is agreed separately.
